E-BIKE TUNING SPEEDBOX 3.0 BOSCH (INCL. GEN4) SPEEDBOX 3.0

Scrie o recenzie
  • Nici o imagine
     vezi mai multe
    In stoc depozit
    SB3_B_1pcs_BOX
  • 850.01 lei include 19% TVA Ai gasit un pret mai bun?

    Produsele aflate in stoc se livreaza in 3-5 zile lucratoare. Produsele in stoc furnizor se livreaza in cca 5-7 zile lucratoare.

    Plata cu cardul ondivne
    Plata cu cardul ondivne prin Mobilpay
    Plata ramburs
    Rate prin StarBT
    Rate prin Garanti Bank
    Rate prin Alpha Bank
    Rate prin First Bank
    Plata in rate prin TBI Bank
    Ordin de plata

    Pentru unitatile care se supun Legii Achizitiilor Publice, oferim posibilitatea achizitionarii produselor si prin Sistemul Informatic Colaborativ pentru Achizitii Publice - SICAP/SEAP

    Depunem eforturi permanente pentru acuratetea informatiilor. Totusi, dorim sa precizam ca poza produsului are un caracter informativ. Unele specificaţii din descriere sau caracteristici pot fi modificate de catre producător fără un preaviz sau pot conţine erori de operare.

    • Comanda Telefonica:

    0769 064 522

    Livrare: 19 lei (oriunde in tara)

    Ajunge in 1-3 zile

Produse din aceeasi categorie

IMBUS CU MANER POINT 6MM
IMBUS CU MANER POINT 6MM
Pret la cerere
IMBUS CU MANER POINT 6MM
IMBUS CU MANER POINT 6MM
Pret la cerere
Clema Montare Cadru Bicicleta, Negru
Clema Montare Cadru Bicicleta, Negru
1.00 lei
Cheie Universala Cu Surubelnita Bicicleta Dhs, Argintiu
Cheie Universala Cu Surubelnita Bicicleta Dhs, Argintiu
2.00 lei
Leviera Anvelopa Force Din Otel Galvanizata
Leviera Anvelopa Force Din Otel Galvanizata
2.00 lei
Oliva Si Insertie Conectare Shimano Sm-Bh59
Oliva Si Insertie Conectare Shimano Sm-Bh59
3.00 lei

Descriere

Indata ce SpeedBox este instalat si functional, opriti update-urile software de orice fel la sistemul electric al bicicletei! In cazul in care faceti un update la software-ul bicicletei iar SpeedBox nu mai poate fi activat dupa, acesta nu va fi inlocuit in garantie!
Produsele SpeedBox pentru Bosch, produse dupa 2024, contin un modul FBL ce se poate re-programa la producator. In cazul in care detineti un astfel de SpeedBox si actualizati software-ul bicicletei, acesta impiedicand ulterior activarea SpeedBoxului, il puteti trimite catre producator pentru actualizare software contra unui cost de 59EUR (fara TVA) + transport.
De asemenea, fiind vorba de un produs Chip-Tuning, garantia bicicletei electrice este anulata dupa montaj.


A smart chip of the third generation with an option to set a speed limit of an e-bike.

SpeedBox 3.0 tuning chip enables to select speed limit of your own choice. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.

How does SpeedBox 3.0 work?

The tuning kit can be activated directly on your bike’s display. After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.

SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of + - + - buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of an electric assistance by changing modes: Turbo - EMTB - Tour - Eco - Tour - EMTB - Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1,5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2,5 corresponds with 25 km/h, 3,0 corresponds with 30 km/h, 9,9 corresponds with 99 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.

When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.

Assembly

When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries.

Recenzii

Nu au fost găsite recenzii